Are you a thrifter? Grab my free tips! Click Here!

How To Repair Rush Seating

July 01, 2016

This post may contain affiliate links.

I repaired a hole in my rush seating with a quick patch.

It took me just a few minutes with my handy glue gun to fill in the hole and make my chair as good as new.

How To Repair A Rush Chair

So yesterday, I was sitting in my kitchen, working on some writing pieces, when my daughter jumped up from her chair at the island with an audible moan.

What's wrong?

Something pinched me. 

She said this looking at her stool.

When she looked back at me with a forlorn expression, I knew it wasn't good.

The seat broke.

Oh no.


I was afraid of that. Apparently, with all the chairs that get broken in our house, sitting is a contact sport.

After fifteen plus years, a strand of the rush in my beloved Pottery Barn Napoleon stool had just worn away and snapped in two.

Leaving behind a hole.

Hand over tear in rush stool seat

Fabulous.

Now, I can sew and paint and drill and nail, but the one thing I know ~ without a doubt ~ that I cannot do, is repair rush seating. I've seen it done and it's way beyond my skill set.

It's not necessarily because of the weaving itself, I get the process, but it has to be done in a precise manner that will stand the test of time. It's a skill and an art form.

Definitely not a super easy DIY, the kind I'm used to tackling myself, so this Exquisitely Unremarkable girl was out.

No big deal. I called the repair shop.

The nice man on the phone gave me an estimate of $200.

Yeah. I was back in.

When I couldn't find anything applicable on Google, I started examining the seat myself.

I figured I could do something to patch it, even if it was only a short term kind of fix.

So I dug in.

First, I checked out the construction.

I knew that pulling the broken strand out could potentially cause a major unraveling event.

I flipped the chair over to peek, and luckily, the broken piece's counterpart underneath the seat was very long and it was firmly anchored. If I cut it, nothing else would be affected.

Perfect.

I could remove the broken piece from the bottom and since it was long enough, use it as a patch.

Hand holding piece of rush on stool

Here's the thing.

I am no professional and 99% of the DIYs I attempt are trial and error, but my philosophy is, if it's not an heirloom, looks like it could be a quick job and I am going to have to pay someone else big bucks to fix it, why not try it on my own.

What's the worst that could happen?

I may be paying a slightly larger repair bill?

Or I'd have to buy these new chairs instead?

I could deal with that.

So I decided to give it a shot.

I pulled that piece through and cut it away from the chair.

Then I grabbed the broken piece from the top of the seat and trimmed it.

Hand showing frayed rush on seat

There was a hard center and several strands of softer material that wrapped around that inner support.

I separated the strands from the support and cut the firm inner pieces away.

I wanted to keep the outer strands to wrap around the patch piece, to camouflage the joined area.

A piece of rush broken away from seat

Next, I threaded one end of the patch piece through the center to the bottom of the chair and laid the rest of it down in the hole created by the break.

Hand placing patch piece on rush chair

It fit together like a puzzle. I anchored it with A LOT of hot glue.

A broken piece of rush seating getting tucked into seat

Then I gently wrapped those soft strands that I had freed up earlier around the end of the new piece, so it looked like it fit in the space and glued the heck out of that, too.

Of course, I burned myself in the process, because I was using my fingers to smooth the glue down.

Not smart.

That's just about the time that my husband came into the room and suggested I use the back of a razor blade to do that and the front of the razor blade to trim away any excess fibers.

He is smart.

Razor Blade scraping away glue and strands of rush

So that's what I did.

Finally, I turned the chair upside down and glued the piece in place from there, too.

Is it perfect?

No.

Repaired Rush Seat On Pottery Barn Napoleon Stool

Would you notice the repair if you came over and didn't know about it?

No way.

Will it last?

We'll see.

We use these chairs every day, but it's pretty solid right now.

Update! It's 2021 and the patch has held up great. I still have these chairs and we still sit in them every single day.

How To Repair A Rush Chair

Of course, if you have any helpful tips for me or have actually re-rushed (is that a word?) or repaired a chair, I would love to hear about it.

I know that this is the beginning of the end for these Pottery Barn stools and while I absolutely adore them, I do not want to invest four hundred bucks for a fix.

Would you?

Oh and like I said, the sitting gets rough around here, so here are some other recent chair repairs.

Create Your Own Custom Chair Patchwork Chair
Easy Custom Patchwork Chair

Hand lifting torn fabric on sofa arm
Repairing A Sofa Tear

Kim Signature


Post a Comment | 71 Comments

Hey~ before you go, let me know what you think!

I love comments and respond to them all.

*Please refer to our privacy policy if you have questions regarding your profile and note that comments with links will not be published.



  1. Hi Kim, great fix and looks perfect. I knew you could patch it. Thanks for sharing. I'll remember this if this happens to mine!!have a great holiday weekend. Happy 4th of July.

    ReplyDelete
    Replies
    1. Thank you so much! It was a quick project so I’m glad I attempted it! :)

      Delete
  2. Wow Kim, you are amazing! I would have never thought to do that and try to fix it myself. It is crazy at how expensive that repair man wanted to charge you. You can just go buy a new one for that!
    My kitchen table and chairs are so old. It's about 20 years old but we love the wood table and chairs. We can eat, do homework, arts and crafts and so on are done on that table!!! LOL.
    Enjoy the weekend and have a happy 4th of July! :)

    ReplyDelete
    Replies
    1. Thanks so much Julie, you are too sweet!! :) I am glad I gave it a shot, I just couldn’t justify the repair cost at this time.

      Delete
  3. Great job Kim. Looks great. Happy 4th.
    Kris

    ReplyDelete
  4. Kim, you are far more persistent than I am. I have two rush-bottomed bar stools, much older than yours and I'm afraid they were downgraded to less important uses and a pillow put over the seat when the very same thing happened.

    I think you deserve a special reward for this job!

    ReplyDelete
    Replies
    1. Thanks so much, Dewena! And trust me, I think those pillow days are coming!! ;)

      Delete
  5. Well, aren't you a clever girl? AND you save yourself some $$$! Crazy charge for that, huh? But- you are paying an artist a fee for fixing, I guess. You did a great job and no one ever know it was repaired.

    Hope you have a great 4th, Kim. xo Diana

    ReplyDelete
    Replies
    1. It really would require an artist to fix it properly, Diana, you are so right. Some day, when the repair gets large, I may go there, but for now, my $1.99 glue gun did the trick!

      Delete
  6. Kim - looks like a great fix/mend
    Well Done

    Wishing you a happy July

    All the best Jan

    ReplyDelete
  7. You did a fantabulous job!!! If the end comes sooner rather than later, you could always remove the rush, pad and upholster a fitted piece of plywood and carry on like you bought them that way :^)
    You are such a good worker.....Would you like about a two month visit to Texas? :^) I have lots of things to work on, and it is warm in winter!!
    Have a wonderful weekend and be safe!
    Blessings,
    J

    ReplyDelete
    Replies
    1. I would love to spend some time in Texas, J! The winters are cold here and it's way more fun to craft in the sun! If only...

      Delete
  8. Kim, you are a girl after my own heart! I share your views on DIY--hey trial and error is you learn, right?! Your chair looks great, BTW! Happy Fourth weekend!

    ReplyDelete
    Replies
    1. Trial and error is my middle name! Well that and cheap! ;-)

      Delete
  9. Hi Kim!

    Good job fixing the seat. i was thinking for the future if you love the chairs maybe you could replace the rush seat with either a wood seat (probably expensive) or cover an inexpensive piece of wood with batting and fabric, leather or something similar, kind of like replacing the fabric on a dining room chair. I have chairs similar to yours but the seat is padded and covered in black leather(?). at least this way you could still keep the pretty chair frame. Hope you and the family have a very Happy 4th of July! xoxo Jen

    ReplyDelete
    Replies
    1. Hi Jen! I love it when you check in and comment! I have thought about that and I am already planning my fabric replacement. I think that this one little break is the beginning of a much larger problem...so I am brainstorming. I appreciate the ideas and I am filing them all away. I just hope these repairs are needed later, instead of sooner!! ;) xoxox

      Delete
  10. I have a thin red cushion on top of my rush barstools - you may want to think about that, to protect them from future damage.

    At least until the kids move out! :)

    And remember....a galloping elephant won't notice it!

    ReplyDelete
    Replies
    1. Red cushions are definitely part of the future plan! And I LOVE that galloping elephant saying. I have been thinking about it and I am contemplating a sign!! Thank you!!

      Delete
  11. good grief! beautiful job!
    YOU are nothing short of AMAZING.
    the things you tackle and accomplish. it boggles this lazy non-DIYer's (is that even a word?)
    mind!!! have a LOVELY holiday weekend dear bean!
    XO♥

    ReplyDelete
    Replies
    1. Thank you so much, Tammy!! I don't know about amazing, but I am pretty good with a glue gun! ;-)

      Delete
  12. No way would I pay! Great job! I would have tried fixing it just like you did although I am not sure my results would be as good. It looks as good as new.

    ReplyDelete
    Replies
    1. Perhaps if the break was larger, I would’ve considered paying…maybe…but for that tiny tear, no way!! ;)

      Delete
  13. Kim those are really hard to repair. Whenever one of mine breaks that is the end of that. I usually just add a cushion on top and I'm done. Kudos to you for doing the undoable... of course with a price tag of $200 to repair it, why would you not attempt it. It looks perfecty new from where I'm sitting. Have a great 4th of July weekend.

    ReplyDelete
    Replies
    1. Thank you, Mary. I am not really sure how long my fix will last. It's a quick fix for a small break, but I do see cushions in my future! ;)

      Delete
  14. Kim, that looks really great! I'm with you on giving it a try. $200 is way too much! You could buy new chairs for that amount of money!

    Thanks for the links to other repairs too!

    ReplyDelete
    Replies
    1. I think you're right, Deanna, I could buy new chairs for that price!

      Delete
  15. You did an amazing job, and no, I don't think I would pay that much to repair it. That's almost as much as a new chair would cost!

    You are so resourceful Kim!

    ReplyDelete
    Replies
    1. Thanks Doreen. I figured I had to at least try! :)

      Delete
  16. Sure looks good to me! I don't think I'd have your patience.
    Brenda

    ReplyDelete
    Replies
    1. Trust me, Brenda, I am not patient. It really took very little time!

      Delete
  17. Good job!! I don't think I would have attempted it myself. I would have tossed a seat cushion on it and called it a fix!

    ReplyDelete
    Replies
    1. Trust me, Kathy, I was ready to do that!

      Delete
  18. You are such a little handy dandy gal! I think it looks great and no, I would not have paid the $200 either. Great job!
    hugs,
    Jann

    ReplyDelete
    Replies
    1. Thanks Jann!! Handy dandy gal...I like it! ;)

      Delete
  19. Hey Kim,
    I got a "helpful tip." Just glue the broken piece back down...LOL. Only thing is, it won't be as pretty as your final result.

    ReplyDelete
    Replies
    1. I am sure it would be great, Florence!! :) And thank you!!

      Delete
  20. I love how you grab the bull by the horns. This was no easy project, at least in figuring out what to do. Kudos to you!

    Jane

    ReplyDelete
    Replies
    1. Thanks Jane, it was like a puzzle, but once I figured it out, it was a quick repair! :)

      Delete
  21. I think it was a "winner fix" . . .
    Looks perfect to me . . ,

    ReplyDelete
  22. Great fix, Kim, and hot glue is the "HandyWoman's" best tool! Kind of sad that we can replace something cheaper than we can repair them....we have become such a "throw away" society and so wasteful. I remember when people actually repaired their televisions. There were tubes and tube tester machines at the hardware store....of course, those televisions were ginormous!

    Hope you have a lovely 4th of July!
    Hugs,
    Carol

    ReplyDelete
    Replies
    1. I agree, Carol...with everything you just said, especially the glue gun comment! It really is my best friend! ;)

      Delete
  23. You did a great job and it looks perfect!

    ReplyDelete
    Replies
    1. I agree, Carol...with everything you just said, especially the glue gun comment! It really is my best friend! ;)

      Delete
  24. Kim, if sitting is a contact sport that I must be quite an athlete! Wonderful job on the fixing. You are entirely too clever..Have a wonderful 4th..xxo Judy

    ReplyDelete
    Replies
    1. Haha!! Judy, you just made me laugh...and trust me, sitting is the only "sport" that I excel at! ;)

      Delete
  25. Great job on your fix! I have no idea how to truly fix one of these seats, but you can Google it - a lot comes up. And no, I certainly wouldn't pay $400 to get those seats fixed!

    ReplyDelete
    Replies
    1. A lot does come up, Melanie. There are some very creative folks out there. My fix is pretty basic and there is no weaving involved whatsoever. Have glue gun will try…anything!! ;-)

      Delete
  26. Wow, I didn't know how to fix this type of chairs. Great post.

    ReplyDelete
    Replies
    1. Thanks Vanessa. I don't think mine fix is the "right" way, but it definitely worked. For now!! ;)

      Delete
  27. Great job. I understand how you burnt yourself with hot glue. I try to remember to use a wooden skewer or popsicle stick and for desperate measures a big aluminum knitting needle or an awl. But- a couple of years back, I discovered Fabri-Tac glue. Love it.
    Myrna

    ReplyDelete
    Replies
    1. I have to get better about using tools, Myrna! I forget that fingers are flammable ~ or burnable!! ;)

      Delete
  28. If anyone could fix it, I knew you would! $200 is a lot of money, and you did a great tutorial on how to fix something as difficult as this - you are amazing :) Hope you are doing well - June has been a busy month, but I hope that in July things will slow down a bit! :)

    ReplyDelete
    Replies
    1. You are so kind, thank you. June was busy around here, too, here's to a calm July...although it's not really shaping up the way! I hope you are having better luck! ;)

      Delete
  29. Kim,
    Such a nifty fix! Love how you have the will and always find a way:)
    Happy post 4th of July!
    Jemma

    ReplyDelete
    Replies
    1. Thanks Jemma. Being cheap is a great motivator! ; )

      Delete
  30. You always do a great job.
    How funny, my parents just bought me a chair at an auction that needs some work. And guess who I thought of immediately, YOU!
    xx oo
    Carla

    ReplyDelete
    Replies
    1. Thank you, Carla. I got lucky with this one. I bet your chair is neat! I wish we lived closer, I would totally work with you!! How fun!

      Delete
  31. You are so smart! We have these same chairs at our dinner table. I thought you were going to talk about them being uncomfortable...because they are. :)

    You were so wise to fix it on your own and you made it look simple. :)

    ReplyDelete
    Replies
    1. I like a soft bottom seat too, Stacey. My kids sit in the stools, I sit in my patchwork chair! Very comfy!! ;)

      Delete
  32. Great fix and it looks good as new. :)

    ReplyDelete
    Replies
    1. Thank you, Kristi. It still looks great!

      Delete
  33. Thank you Teri, you are so sweet!! :)

    ReplyDelete
  34. Hi

    I have a Vintage Dining Chair with a Woven Rush seat base. The seat base sags. I remember hearing from my now deceased Brother that one way of tightening it up is to steam it from underneath.

    Is this true? Has anyone else tried it and made it work?

    Perry

    ReplyDelete
    Replies
    1. Hi Perry, I have actually never heard this, but I'm no expert. Perhaps someone else will weigh in. However, I would go over to Hometalk.com and ask this same question in their community forum. They have millions of DIYers there who answer questions and I bet you'll get a quick reply. I hope that helps!! Good luck!!

      Delete